Nhựa in 3D resin (dùng cho in trang sức) - Ifun 3122w Easy Casting High Accuracy UV 405nm 3D Printer Resin For LCD 3D
Nhựa in 3D resin (dùng cho in trang sức) - Ifun 3122w Easy Casting High Accuracy UV 405nm 3D Printer Resin For LCD 3D
Nhựa in 3D resin (dùng cho in trang sức) - Ifun 3122w Easy Casting High Accuracy UV 405nm 3D Printer Resin For LCD 3D
Nhựa in 3D resin (dùng cho in trang sức) - Ifun 3122w Easy Casting High Accuracy UV 405nm 3D Printer Resin For LCD 3D
1 / 1

Nhựa in 3D resin (dùng cho in trang sức) - Ifun 3122w Easy Casting High Accuracy UV 405nm 3D Printer Resin For LCD 3D

0.0
0 đánh giá

- Physical and chemical properties (before curing): Viscosity: 200-350cps(@25℃) Density: 1.05±1.1g/cm³ Flash point: 90-130℃ - Physical and chemical properties (after curing): Shrinkage: <1% Hardness(D): 80A-40D Tensile Strength: 15-25MPa Ignition temperature: 350℃

2.500.000
Share:
4.9/5

Đánh giá

142

Theo Dõi

235

Nhận xét

- Physical and chemical properties (before curing): Viscosity: 200-350cps(@25℃) Density: 1.05±1.1g/cm³ Flash point: 90-130℃ - Physical and chemical properties (after curing): Shrinkage: <1% Hardness(D): 80A-40D Tensile Strength: 15-25MPa Ignition temperature: 350℃ Modulus of elasticity: 300-350MPa Breaking strength: 20-25MPa Elongation: 30-50% The secondary curing time of casting resin is required to be long. The secondary curing time affects whether the resin can burn out, because it is adjusted according to the actual effect. - Recommended thickness: 0.05mm - Light source wavelength: 405nm - Machine type: Relative light intensity DLP: 5 L4K Pro: 1 CREALITY: 0.6 ANYCUBIC (2k): 0.4 - LCD(4K Mono) Bottom exposure: 60s Normal layer exposure: 6 Top support diameter: 0.6~0.8mm Support diameter: 0.8~1.2mm Support density: 50% Support angle: 45% post-curing time (30W power): 30 min Nếu quý khách có yêu cầu tư vấn thêm xin liên hệ Zalo: 0934646301 / 0348818447

Thương hiệu

No Brand

Bảo Hành

Không Bảo Hành

Sản Phẩm Tương Tự