Micro thu âm chuyên nghiệp LEWITT LCT 450. Hàng nhập khẩu.

The LCT 450 steps up to the plate with the LCT 540’s capsule and thus features a natural, authentic sound with first-class transient response due to the ultra-thin, gold-layered, low-mass, 1-inch diaphragm, while its cardioid polar pattern ensures effective rear sound rejection both onstage and in the studio. It comes with two-step switchable pre-attenuation for an ear-splitting maximum SPL of 173 dB at 20 dB of attenuation. Two low-cut settings help to reduce unwanted low-frequency noise like wind, footsteps or the like.Clever features known from flagships like the LCT 640 or LCT 940 are also onboard, including automatic attenuation and clipping history – as well as, of course, the illuminated user interface for quick and easy handling in dark environments. All this, combined with the brilliant, clear and authentic sound that characterizes our recording microphones, has been packed into our well-known LCT 240 housing to ensure that the LCT 450 isn’t too dominant as an onstage overhead; studio users, on the other hand, will appreciate the appealing look that reflects its professional inner workings.In short: the LCT 450 has everything it needs and nothing more, so what you pay for is pure performance rather than gimmicks. The LCT 450 is LEWITT’s gateway to the world of large-membrane condenser microphones for everyone who’s looking for the best performance at an affordable price! Features LEWITT’s gateway to the world of large diaphragm condenser microphones - at an affordable price 1-inch true condenser capsule in a small housing Natural authentic sound with first-class transient response 3 micron thin gold-sputtered Mylar diaphragm A perfect choice for vocals, overheads and acoustic instruments Cardioid polar pattern for effective rear sound rejection 9 dB (A) self noise 138 dB dynamic range SPL max of 158 dB (A) Immune to electromagnetic interference thanks to transformerless preamplifier circuitry Illuminated user interface for quick and easy handling in dark environments Noiseless pushbuttons for attenuation and low-cut selection Automatic Attenuation and Clipping History mode Rugged zinc die cast body Internal shock mount for maximum reduction of structure borne noise Corrosion-resistant gold-plated 3-pin XLR output connector Top applications Vocals & background vocals Classic drum & percussion overhead Acoustic instruments (strings, guitars, piano and similar) Ambitious stereo recording techniques (XY, ORTF, AB, ) Tech Data Acoustical operating principle pressure gradient transducer, externally polarized Diaphragm 3 micron gold sputtered Mylar Transducer Ø 25.4 mm / 1 inch Polar pattern cardioid Frequency range 20 to 20,000 Hz Sensitivity 18 mV / Pa (-35 dBV) Enclosure zinc die cast Connector gold plated 3-pin XLR Dimensions 138 x 52 x 36 mm5.43 x 2.04 x 1.42 inch Net weight 357 g13.12 oz. Signal / noise ratio 85 dB (A) Equivalent noise level 9 dB (A), according to IEC 60268-1 Dynamic range of FET mic. Amp. 138 dB (A) Max. SPL for 0,5 % THD 147 dB, 0 dB pre-attenuation158 dB, 20 dB pre-attenuation Pre-attenuation pad 20 dB / switchable Low cut 12 dB / octave at 80 Hz Rated impedance < 150 ohms Rated load impedance > 1.000 ohms Supply voltage 48 V +/- 4 V Current consumption 5.5 mA Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....